At some point, you are going to need to jump the battery your vehicle. Your battery is going to run out of juice, and you are going to need to use someone else’s vehicle to get your car up and running.
Many will pull out their jumper cables and jump their vehicle without thinking about the dangers of jump-starting a car. You need to make sure that you fully understand the dangers of jumping a battery to keep yourself safe during the jumping process. These 4 tips will help you to have a safe jump-start.
Understand the State of your Battery
It is incredibly important for you to understand the state of your battery. This can help to keep you safe, but can also help to keep you from wasting your time.
Improper jump-starts can actually cause your battery to explode. This can cause serious bodily harm, as the explosion is both powerful and corrosive in material nature.
If you are in cold weather, check to see if your battery is frozen. You will be able to see if the battery liquid is frozen by looking at the vent caps of the battery. If the liquid is frozen, you cannot attempt to jump-start the vehicle. If you attempt to do so, the battery may explode.
If you find that your battery has cracks in the battery casing, do not attempt to jump-start your vehicle. A battery with cracks in the casing cannot be jumped, as the battery itself is ruined.
Wear Gloves and Goggles
If you are going to jump-start a vehicle, use gloves and goggles. While it is not necessary to do so, it can help to keep you protected. Batteries feature corrosive material that can be incredibly damaging when in contact with the skin or eyes. If the battery does happen to explode, the goggles will help to keep your eyes protected.
Follow the Steps
If you are jump-starting a vehicle, you need to make sure that you work in the proper order. You must first connect to the dead battery’s positive terminal. You then attach that cable to the positive area of the vehicle that you will use to jump the car. You then attach the other cable to the negative area of this vehicle, and finally connect the final end of the cable to an unpainted metal surface on the vehicle. It is important to remember that you should never attach the negative cable to the battery of the car that does not work.
Remember the Reverse
When you are done jump-starting the vehicle, you need to work backwards. Take the cables off in the reverse order of the aforementioned steps to ensure your safety.
The process of jump-starting a vehicle is only dangerous when done incorrectly. If you know what to avoid and what to look for, you can be sure to jump-start a vehicle safely and easily. Take the time to understand the process, and to understand how to properly jump a car. You will be able to keep you and those around you safe.